New Trailers
Drop Deck Flat Top Trailer
STANDARD SPECIFICATIONS
| DIMENSIONS: | Length up to 14600mm (48’) x 2500mm (8’ 2 ½”) wide. Top and bottom deck lengths to suit requirements. Deck height designed to suit turntable height of prime mover |
| CHASSIS: | Fabricated ‘I’ Beam with 130mm x 12mm top flange and 130mm x 16mm bottom flange |
| COAMING RAILS: | 100mm x 45mm High Tensile RSJ with 25 N.B. pipe tie rail. Option: 125mm x 65mm RSJ |
| CROSSMEMBERS: | 100mm x 45mm RSJ Option: Container beams to suit 1 x 40ft., 2 x 20ft., or 1 x 20ft |
| FLOOR: | 3mm chequer plate Option: 2.5mm smooth steel or extruded aluminium floor |
| AXLES: | York Model 2782 – 20” spider Option: Various Axle brands and models available |
| TYRES: | Nil. (Range available) |
| RIMS: | Nil. (Range of steel spider, 10 stud steel or aluminium rims available) |
| SUSPENSION: | York MT75 8’1” Spring Tri-axle cast steel overslung. Option: Various spring or air suspension brands available. |
| KING PIN: | 50mm Jost bolt-in (D-value 190kN) with bolt-on turntable block |
| BRAKES: | Air Brake Corp Tri-axle to ADR 38/02 Specifications. Option: Road train brake kit. |
| LANDING LEGS: | Jost A400 Series |
| TYRE CARRIER: | Dual through chassis type, with retainer straps |
| TOOLBOXES: | One x 1200mm lockable type with spring loaded catches Option: Additional toolboxes may be fitted. |
| WATER TANK: | One x 60 litre galvanised Option: Plastic water tank available |
| MUDGUARDS: | Pressed aluminium tread plate guards with mudflaps front and rear of suspension |
| GATES: | Pockets only. Front and rear load racks (height to suit) Option: High tensile RHS single or twin bow gates with height as required. Tarp bow rack also available |
| LIGHTS: | Lights (wired in conduit), Reflectors, and Rear Marker Plates conforming to all relevant Australian Design Rules Option: LED lights – side and rear |
| PAINT: | Trailer is deburred and fully sandblasted prior to painting with Etch Primer undercoat and PPG 2K finish coat to Fleet or Customer colours (with scrollwork to suit). Option: Various finishes are available including Metallics, Clear-Over-Base, and Chemical resistant paints |
| OTHER OPTIONS: | Hubodometer, Winches (clip-on or track type), Winch track, Rear Loading Ramps and/or Beaver Tail, Ringfeeder (bracket only or complete). |
THESE SPECIFICATIONS ARE A GUIDE ONLY, AS EACH RHINO TRAILER CAN BE DESIGNED AND MANUFACTURED TO SUIT THE CUSTOMER’S SPECIFIC REQUIREMENTS